The FL-1500A series has been discontinued. Please contact our FLOW Engineering department.
OMEGA FL-1500 flow meters combine 2% accuracy and side plate construction at an economical price.
These flowmeters feature glass and 316 stainless steel construction, with aluminum side plates and acrylic plastic shields.
The float design provides high immunity to viscosity variation, and the NPT thread connections provide easy installation into
industrial and laboratory systems.
SPECIFICATIONS Scale: Fused on metering tube, 10 to 100% of flow scale Metering Tube: Borosilicate glass Float and Float Stops: 316 Stainless Steel End Fittings: Standard: 316 Stainless Steel Optional: Brass O-Rings: FKM-A Structural: Side Plate: Aluminum shields; acrylic plastic shields, front and back Maximum Pressure: FL-1501 and FL-1502: 20.68 bar (300 psig) FL-1503: 12.06 bar (175 psig) FL-1504: 6.9 bar (100 psig) Max Temperature: 121°C (250°F) Accuracy: ±2% full scale Repeatability: ±0.5% full scale
† Price are shown in RMB.
Note: Comes complete with operator's manual.
For models with brass end fittings, add suffix "-B" to the model number, subtract $150 from price.
Part Number Builder
Qty:
Option Descriptions
(1)
Range
Select 1 for 0.317-3.17 SCFM air/0.078-0.78 GPM water 2 for 0.588-5.88 SCFM air/0.145-1.45 GPM water 3 for 1.045-10.45 SCFM air/0.253-2.53 GPM water 4 for 2.576-25.76 SCFM air/0.628-6.28 GPM water
(2)
End Fittings
Select Nothing(leave field blank) for 316 SS (standard) -B for Brass (optional)
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
Keywords:High Accuracy Variable Area Flow Meters - Capacity: .078 to 6.28 GPM for Water/.317 to 25.76 SCFM for Air
