工业型旋转编码器，带单通道或正交输出 - 可转换为工业长度传感器

ZB SERIES Rotary Encoder

Industrial Duty Rotary Encoder, Length Sensor

查看下面所有型号

下单

Single Channel or Quadrature Output Models
Current Sinking, 250 mA Maximum
4.75 to 28 Vdc Supply Voltage
Up to 1000 PPR for High Resolution Precision Counting or Speed Measurement
6000 RPM Shaft Speed
Conversion Bracket for Length Sensor Measurement

产品描述

AU-ZBG10002 encoders with the length sensor conversion kits are used for precise speed control in Omega's manufacturing process for metal sheath thermocouple wire.

The ZB Series shaft encoders are general duty industrial rotary pulse generators. The AU-ZBG models are for single channel sensing for counting, one directional measuring or speed applications. The AU-ZBH models are for quadrature applications, allowing for counting up and down along with speed and direction measurements. A conversion bracket is available to easily convert this encoder into a length measuring sensor. They can be direct-coupled to a machine shaft by means of a flexible-bellows, spring, or rubber sleeve type coupling that allows for axial and radial misalignment. They can also be coupled with light instrument timing-belts. Timing-belt drives also allow convenient gear-up or geardown speed ratio changes that can be useful for obtaining non-standard PPR rates.

Specifications
Supply Voltage: 4.75 to 28 Vdc
Output: Current sinking, 250 mA maximum current per output
Maximum Frequency: 1000 ppr, 20 KHz
Connections: 6-pin MS style connector (male) (MIL-C-5015)

See SPECS above for full specifications and additional information on length sensor conversion kit.

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

AU-ZBG01002

咨询

货期:

Single channel shaft encoder, 100 ppr

AU-ZBG10002

咨询

货期:

Single channel shaft encoder, 1000 ppr

AU-ZBH01002

咨询

货期:

Quadrature encoder shaft encoder, 100 ppr

AU-ZBH10002

咨询

货期:

Quadrature encoder shaft encoder, 1000 ppr

22 AWG shielded cables, 4-conductor with drain

CCARPG01

咨询

货期:

10 foot cable with 6-pin MS connector

CCARPG25

咨询

货期:

25 foot cable with 6-pin MS connector

CCARPG50

¥1,110.17

货期: 2 周

50 foot cable with 6-pin MS connector

Flexible Shaft Couplings

AU-RPGFC002

咨询

货期:

Shaft diameter 0.250 - 0.375", 28mm long & 20mm diameter

AU-RPGFC003

咨询

货期:

Shaft diameter 0.375 - 0.375", 28mm long & 20mm diameter

AU-RPGFC004

咨询

货期:

Shaft diameter 0.375 - 0.500", 40mm long & 32mm diameter

AU-RPGFC005

咨询

货期:

Shaft diameter 0.375 - 6mm, 22mm long & 16mm diameter

Accessories

AU-LSCB1000

咨询

货期:

Length sensor conversion bracket

AU-LSAHC001

咨询

货期:

Hing clamp assembly for length sensor conversion bracket

AU-WF1000F

咨询

货期:

1 foot circumfrence urethane measuring wheel

AU-WF1000K

咨询

货期:

1 foot circumfrence knurled measuring wheel

AU-WM0400F

咨询

货期:

4/10th meter circumfrence urethane measuring wheel

AU-WM0400K

咨询

货期:

4/10th meter circumfrence knurled measuring wheel

† 所有金额以RMB显示
注: Note: NPN Transistor outputs have 1.5 KÙ load resistors returned to supply for internal feed back purposes. This does not interfere with the ability to use these outputs as conventional “Open-Collector” outputs as long as the supply voltage for the ZB is supplied by the indicator or control receiving its output signal. The ZB’s internal load resistor also allows the output to be used as a current source, however, load current must be limited to 1 mA maximum