The RCK-11 and RCK-12 series has been discontinued. Please contact our Flow Engineering department for a viable replacement.
The 3D gyration rockers are designed to generate in three
dimension rocking motion with smooth and full mixing
action. The rockers are ideal for low foaming agitating, and
widely used in DNA extractions, staining and de-staining
procedures. The tilted angle can be adjusted manually from
3 to 12 degree. Rockers are often used in conjunction with
incubators and environmental chambers and can be used in
temperatures up to 40°C (104ºF) and humidity up to 80%.
The RCK-11 model provides a good safety feature; when the
motor stalls or overloads, the unit will stop, beep and show
an error message in the LED display.
With a large platform, the rockers can accommodate large
vessels such as culture flasks, petri dishes etc. The
non-slip matt on the tray can prevent vessels from slipping
away during agitation. There are two models for this type
of the rocker, both of them are microprocessor controlled;
the digital model RCK-11 provides a digital timer with up to
9 hours of setting and speed control in a 1 RPM increment.
The RCK-12 model provides 2-hour timers (in 10 minute
integral) and 10 steps speed control without digital display
as shown in MOS.
Specifications Speed Range: 5 to 70 rpm Rocking Type: 3D gyratory Platform Dimensions: 355 W x 355 mm L (14 x 14") Tilting Angle: 3 to 12º Angle Adjustable: Yes Timer: RCK-11: 540 minutes (digital) RCK-12: 120 minutes Speed Control Mode: RCK-11: Digital in 1 rpm increment RCK-12: 10 integral selection Maximum Load: 10 kg (22 lb) Dimensions: 360 W x 420 L x 210 mm H (14.2 x 16.5 x 8.3") Operation Temperature Range: 4 to 40°C (39.2 to 104°F) Maximum Operation Humidity: 80% Net Weight: 10 kg (22 lb) Power Supply: 120V, 60 Hz, 50 watt
† 所有金额以RMB显示 注: Comes complete with operator’s manual.
