购物车  |  联系  |  info@cn.omega.com  | 
omega-qr-code OMEGA微信公众号
咨询热线 400-619-0559

3-A经过批准的卫生RTD传感器,带聚丙烯或不锈钢连接头

PRS-NB9W Sanitary RTD Sensors

3-A Approved Direct Immersion Sanitary RTD Sensors Pt100 with Connection Heads for use in Food, Dairy, Beverage and BioPharmaceutical Processes | PRS-NB9W Sanitary RTD Sensors

查看下面所有型号

  • 3-A Approved Design, Along with ASME-BPE-2007 Flange Geometry, Insures Trouble-Free Cleanability and Interchangeability
  • Can Be Used in Sanitary, Hygienic and Clean-In-Place Food, Dairy, Beverage and BioPharmaceutical Processes
  • Wetted Surfaces are 316L Stainless Steel, Surface Finish = 32 Microinch or Better
  • Standard Duty ¼" (0.250") Diameter or
    Heavy Duty Stepped 38" to 316" Diameter Probes Available
  • 4-Wire, Pt100, Class A Platinum RTD Sensor (100.00 ±0.06 Ω at 0°C) Standard
  • Process Measurement Temperature Range: -50 to 200°C (-58 to 392°F)
  • Compatible with 3-Wire and 2-Wire RTD Instruments & Transmitters
卫生 - 查看相关产品

产品描述

Sanitary Sensor Specifications Include:
  • 316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.

  • Probe lengths of 3, 4, 5 or 6 inches available from stock, other lengths available as special orders.

  • Sensor Output is a 4-wire, 100 ohm, Class A, Platinum RTD meeting the requirements of IEC 60751.

  • These sensors can also be used with 2-wire or 3-wire systems see information below.

  • Insulation resistance: 100 megohms minimum at 100 VDC.

  • Thermal response time of less than 2.5 seconds in water flowing at 3 ft/sec (63% response).

  • Optional stainless steel connection heads available.


  • 3-A approved The 3-A Approved OMEGA™ PRS-S-NB9W and PRS-H-NB9W Series RTD Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These sensors are manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-05 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes.

    The probe stems are manufactured in two configurations; with a standard ¼" diameter probe for standard duty service, and a stepped 3/8" to 3/16" diameter probe design for good response times in heavy duty applications. A white polypropylene connection head provides a convenient 3/4" NPT threaded connection point for process wiring.

    Food process hygienic temperature sensors can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point) or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.

    In addition to the standard 1½-16AMP process connection, these can be provided in the following sizes and styles:
    Process ConnectionModel Number Code
    3/4"-16AMP-B1-
    1" and 1½"-16AMP-D1-
    2"-16AMP-E1-
    2½"-16AMP-F1-
    3"-16AMP-G1-
    4"-16AMP-H1-










    If you need a process connection that is not listed above, please contact our sales department for availability.

    These sensors are supplied standard as 4-wire assemblies with two red wires and two white wires. When used in 3-wire applications simply connect to three of the wires (typically two red and one white). When used in 2-wire applications, connect to one of the red wires and one of the white wires.

    These sensors are also available with Thermistor and Thermocouple sensors to accommodate any process input requirement.
    订购 所有价格均为人民币税前价格,不包括13%增值税和运费!(指定型号)
    网上下单立享5%折扣!
    产品编号产品描述
    数量
    产品描述
    Straight Sheathed ¼" Diameter, Standard Duty Probe Assemblies
    Quick Ship
    PRS-3-100-A-S-0300-D1-NB9W
    ¥890.00
    货期: 5 周
     
    3" long standard duty probe
    Quick Ship
    PRS-3-100-A-S-0400-D1-NB9W
    ¥890.00
    货期: 5 周
     
    4" long standard duty probe
    Quick Ship
    PRS-3-100-A-S-0500-D1-NB9W
    ¥890.00
    货期: 5 周
     
    5" long standard duty probe
    Quick Ship
    PRS-3-100-A-S-0600-D1-NB9W
    ¥890.00
    货期: 5 周
     
    6" long standard duty probe
    Stepped 38" Diameter to 316" Diameter Sheath, Heavy Duty Probe Assemblies
    Quick Ship
    PRS-3-100-A-H-0300-D1-NB9W
    ¥1,160.00
    货期: 5 周
     
    3" long heavy duty probe
    Quick Ship
    PRS-3-100-A-H-0400-D1-NB9W
    ¥1,160.00
    货期: 5 周
     
    4" long heavy duty probe
    Quick Ship
    PRS-3-100-A-H-0500-D1-NB9W
    ¥1,160.00
    货期: 5 周
     
    5" long heavy duty probe
    Quick Ship
    PRS-3-100-A-H-0600-D1-NB9W
    ¥1,160.00
    货期: 5 周
     
    6" long heavy duty probe

    按产品编号购买

    产品编号
    数量
    产品编号
    数量


    所有金额以RMB显示
    注:
  • For a 3-A Approved stainless steel connection head, change "NB9W" to "NB15" in model number and add $37 to the price. For a medium sized stainless steel connection head, change "NB9W" to "NB13" in model number and add $55 to the price. For a white polypropylene flip top connection head, change "NB9W" to "NB16W" in model number and add $7 to the price.

  • For longer probe lengths on Standard Duty construction, change length in model number to required length in inches and add $1 per inch to the price (up to 24 inches).
  • For Heavy Duty construction, change length in the model number to the required length in inches and add $2.50 per inch to the price (up to 24 inches).
  • For other than the standard 1½-16AMP process connection, change "-D1-" in the model number to the code for the alternate process connection option listed above the "To Order" table and add $20 to the price
  • For lengths over 24 inches,or for other cap sizes and styles, please contact Sales.


  • 订购示例: (1) PRS-3-100-A-S-0400-D1-NB9W Sanitary RTD with 1½, ¥890.00

    产品编号生成器

    在此处生成您自己的产品编号
    选项说明:


    (1) Nominal Element Resistance 选项:
    100 for 100 ohm @ 0 C (standard)
    1000 for 1 kohm @ 0 C

    (2) Accuracy Class 选项:
    A for Class A Accuracy

    (3) Probe Diameter 选项:
    S for Standard Duty 1/4 inch
    H for Heavy Duty 3/8 to 3/16 inch stepped probe

    (4) Probe Length 选项:
    0300 for 3 inch length
    0400 for 4 inch length
    0500 for 5 inch length
    0600 for 6 inch length

    (5) Sanitary Flange (Cap) Size 选项:
    D1 for 1-1/2 inch Tri-Grip Flange (standard)
    B1 for 3/4 inch 16AMP Tri-Grip Flange
    E1 for 2 inch 16AMP Tri-Grip Flange
    F1 for 2-1/2 inch 16AMP Tri-Grip Flange
    G1 for 3 inch 16AMP Tri-Grip Flange
    H1 for 4 inch 16AMP Tri-Grip Flange

    (6) Protection Head 选项:
    NB9W for White Polypropylene Head with Screw Cap (Standard)
    NB15 for Large Stainless Steel Head
    NB13 for Medium Stainless Steel Head (not 3A approved)
    NB16W for White Polypropylene Head with Flip Top (not 3A approved)
    注: 并非所有组合都有效,请查阅规格表上的有效产品编号。