购物车  |  联系  |  info@cn.omega.com  | 
omega-qr-code OMEGA微信公众号
咨询热线 400-619-0559

卫生RTD传感器,带铠装热电偶/可插拔传感器/连接头,适用于就地清洗(CIP)过程

PRS-TW-NB9W Series

Sanitary Thermowell/ Removable Sensor/ Connection Head Assemblies for Food, Dairy, Beverage and BioPharmaceutical Applications | PRS-TW-NB9W Series

¥1,770.00 PRS-3-100-A-TW-0250-D1-NB9W

  • Clean-In-Place Design for Use in Food, Dairy and pharmaceutical Processes
  • Removable Probe Assembly is Spring Loaded Into Thermowell for Good Thermal Response
  • Standard Mounting Cap is a 1½" 16AMP Tri-GripTM (Tri-Clamp® Compatible) Design, Other Cap Sizes and Styles are Available
  • Avalable with 158, 2½:", 4½", 7½" and 10½" Immersion Lengths Standard
  • White Polypropylene Screw Cap Connection Head Standard, Stainless Steel and Flip Top Polypropylene Heads Also Available
  • Wetted Surfaces are 316L Stainless Steel with a Surface Finish of 32 microinches or Better
  • 4-Wire, Pt100 Class A Platinum RTD Sensor (100.00±0.06Ω at 0°C) Standard
  • Process Measurement Temperature Range: -50 to 200°C (-50 to 392°F)
  • Compatible with 3-Wire and 2-Wire RTD Instruments & Transmitters
卫生 - 查看相关产品

产品描述

This Pt100 RTD sensor is designed for use in sanitary or Clean-In-Place (CIP) applications where the use of a thermowell assembly is preferred over direct immersion sensors. The thermowell includes a 1½", 16AMP cap feature for easy installation using industry standard gaskets and clamps. The spring loaded RTD probe can be removed from the thermowell without exposing the system to ambient conditions for calibration or replacement. This sensor is also supplied with a white polypropylene screw-cap style connection head with 3/4"NPT conduit connection standard, Stainless steel screw-cap heads, and a flip top style white polypropylene head are also available.

Sensor Specifications Include:
  • 316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.

  • Immersion lengths of 158, 2½", 4½", 7½, and 10½" are available from stock, with others available.

  • Sensor Output is a 4-wire, 100 ohm, Class A, Platinum RTD meeting the requirements of IEC 60751.

  • These sensors can be used with 2-wire or 3-wire systems see information below.

  • Insulation resistance: 100 megohms minimum at 100 VDC.

  • Optional stainless steel connection heads available.


  • Food process hygienic temperature sensors can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point) or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.

    These sensors are supplied standard as 4-wire assemblies with two red wires and two white wires. When used in 3-wire applications, cut off one white wire making sure that it will not contact any terminals or metal surfaces (note: twisting the two white wires together will reduce the lead wire resistance on one side of the sensing element by half adversely affecting the accuracy of the reading). When used in 2-wire applications, cut off one white wire and one red wire (note: in 2-wire applications, twisting the two same-colored wires together at the terminals will not adversely affect your sensor accuracy since both wires will be affected by the reduction in resistance).
    订购 所有价格均为人民币税前价格,不包括13%增值税和运费!(指定型号)
    网上下单立享5%折扣!
    产品编号产品描述
    数量
    产品描述
    Quick Ship
    PRS-3-100-A-TW-0163-D1-NB9W
    ¥1,625.00
    货期: 5 周
     
    4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 158" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head
    Quick Ship
    PRS-3-100-A-TW-0250-D1-NB9W
    ¥1,770.00
    货期: 5 周
     
    4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 2½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head
    Quick Ship
    PRS-3-100-A-TW-0450-D1-NB9W
    ¥1,930.00
    货期: 5 周
     
    4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 4½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head
    Quick Ship
    PRS-3-100-A-TW-0750-D1-NB9W
    ¥2,195.00
    货期: 5 周
     
    4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 7½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head
    Quick Ship
    PRS-3-100-A-TW-1050-D1-NB9W
    ¥2,355.00
    货期: 5 周
     
    4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 10½" Immersion Length, with a White Polypropylene Scew-Cap Style Connection Head

    按产品编号购买

    产品编号
    数量
    产品编号
    数量


    所有金额以RMB显示
    注: Notes: For other cap sizes and styles, for other lengths, or for thermistor or thermocouple versions of this product, please contact Sales.

    Options: For a flip top polypropylene head, change "NB9W" in model number to "NB16W" and add $7 to the price, for a large stainless steel screw top head, change to "NB15" and add $37 to the price, for a medium sized stainless steel screw top head, change to "NB13" and add $55 to the price.

    订购示例: (1) PRS-3-100-A-TW-0450-D1-NB9W Removable Pt100 RTD Sensor with 1½, ¥1,930.00

    产品编号生成器

    在此处生成您自己的产品编号
    选项说明:


    (1) Nominal Element Resistance 选项:
    100 for 100 ohm @ 0 C (standard)
    1000 for 1 kohm @ 0 C

    (2) Accuracy 选项:
    A for Class A Accuracy

    (3) Insertion Length 选项:
    0163 for 1-5/8" insertion (2-1/2" well stem length)
    0250 for 2-1/2" insertion (4" well stem length)
    0450 for 4-1/2" insertion (6" well stem length)
    0750 for 7-1/2" insertion (9" well stem length)
    1050 for 10-1/2" insertion (12" well stem length)

    (4) Protection Head 选项:
    NB9W for White Polypropylene Head with Screw Cap
    NB15 for Large Stainless Steel Head
    NB13 for Medium Stainless Steel Head
    NB16W for White Polypropylene Head with Flip Top
    注: 并非所有组合都有效,请查阅规格表上的有效产品编号。