购物车  |  联系  |  info@cn.omega.com  | 
omega-qr-code OMEGA微信公众号
咨询热线 400-619-0559

pH、ORP和电导率控制器和变送器

PHUCN601, PHUCN610, PHUTX601

pH, ORP and Conductivity Controller and Transmitter | PHUCN601, PHUCN610, PHUTX601

pH, ORP and Conductivity Controller and Transmitter

查看下面所有型号

1年保修
  • For pH, ORP, Conductivity/Resistivity
  • 1/4 DIN, NEMA 4X, Polycarbonate Enclosure
  • User-Friendly Design with Interior LCD Menu
  • Easy to Read with Large, Bright LED Display
  • Quick and Easy to Calibrate
  • Reduces Chemical Consumption with Cycle Timed Relays on Controllers
  • Two Control Relays with Third Relay for High/Low Alarm on Controllers
工业pH仪表和电极 - 查看相关产品

产品描述

The PHUCN600 Series multi-parameter controller is a microprocessor-based controller capable of measuring one of the following parameters, pH, ORP, or conductivity.
When shipped from the factory, the PHUCN600 Series is not set to measure any one parameter.When the PHUCN600 Series is powered up for the first time, it will display the meter selection screen where the meter type must be selected. This meter selection screen will only be displayed when the PHUCN600 Series is powered up for the first time.
After the user selects a meter type the PHUCN600 Series will remain set to that meter type until it is changed with the meter selection menu function in the Utilities menu.
To return the PHUCN600 Series to its factory settings, the user must re-select the current meter type from the meter selection menu function. This will override all set-points and return all settings back to the factory settings. The PHUCN600 Series User’s menu has been divided into five main categories:
  • Calibration, used to calibrate the PHUCN600 Series with the selected sensor
  • Utilities, used to manually control or override the outputs
  • Setup, used to configure the PHUCN600 Series many options
  • Diagnostics, used to troubleshoot any problems
  • Outputs, used to configure the PHUCN600 Series outputs.
There are two displays on the PHUCN600 Series. A bright LED numeric display with bar graph on the outside front panel, and a 2-line, 16-character LCD display on the inside. The LED readout on the outside panel can be seen several yards away. The distinctive, Color coded bar graph will immediately indicate if you are within the process parameters that you set (green), if the control relays are on (yellow) and if you are in alarm condition (red). This makes diagnosing pump and alarm malfunctions easy. All configuration and control functions are performed on the LCD menu on the inside front panel.
A universal mounting kit is included for surface, panel and pipemount applications. The 1/4" DIN enclosure makes panel-mount cutouts and engineering simple.
Complete and versatile the PHUTX600 is the 1/4 DIN two wire transmitter which can measure Conductivity, pH or ORP. PHUTX600 comes complete with a universal mounting kit for surface, panel and pipe-mount applications. The NEMA 4X 1/4 DIN enclosure is perfect for stand-alone or panel-mount operation.
PHUCN600 and PHUTX600 Series are packaged in a rugged NEMA 4X polycarbonate enclosure making it ideally suited for heavy-duty applications such as industrial wastewater neutralization, municipal water and wastewater, pulp and paper, and process control.

The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.

订购 所有价格均为人民币税前价格,不包括13%增值税和运费!(指定型号)
网上下单立享5%折扣!

其他客户同时购买: 这个图标可以点击扩大,跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述
数量
产品描述
Controllers
Quick Ship
  
PHUCN601
咨询  
货期: 
 
 
120 Vac pH/ORP conductivity
Quick Ship
  
PHUCN610
咨询  
货期: 
 
 
240 Vac pH/ORPconductivity
Transmitter
Quick Ship
  
PHUTX601
咨询  
货期: 
 
 
Transmitter pH/ORP conductivity
Electrodes with 1 1/2 NPT, 4.6 m (15') 5 conductor shielded cable, -5 to 95°C (23 to 203 °F)
Quick Ship
  
PHE-600
咨询  
货期: 
 
 
1 1/2 NPT differential pH electrode, PPS sensor body 180 mm (7.1") long 55 mm (2.14") diameter
Quick Ship
  
ORE-600
¥5,760.00
货期: 10 周
 
1 1/2 NPT differential ORP electrode, PPS sensor body 180 mm (7.1") long 55 mm (2.14") diameter
Electrodes with 1 1/4" compression fitting for variable insertion, 4.6 m (15') 5 conductor shielded cable, -5 to 95°C Wetted materials: CPVC PVDF glass titanium palladiam alloy and EPDM (platinum for ORP probe) psig max: 6.9 bar (100 psig)
Quick Ship
  
PHE-610
¥6,545.00
货期: 2 周
 
Compression fitting pH electrode for 7/8" to 5" variable insertion, 229 mm (9") long, 28 mm (1.125") diameter
Quick Ship
  
ORE-610
¥5,945.00
货期: 10 周
 
Compression fitting ORP electrode for 7/8" to 5" variable insertion
Quick Ship
  
PHE-620
¥6,545.00
货期: 6 周
 
Hot tap pH electrode for extended lengths 7/8" to 6" variable insertion
Quick Ship
  
ORE-620
¥6,405.00
货期: 10 周
 
Hot tap ORP electrode for extended lengths 7/8" to 6" variable insertion
Conductivity cells with 3/4 MNPT CPVC compression fitting, auto. temp. Compensation: 0 to 100°C (32 to 212°F). Wetted materials:Graphite, epoxy, EPDM,& CPVC Max. Press/Temp: 50 psi @60°C, 100 psi @ 50°C, 150 psi @ 20°C cable length: 6.10 m (20')
Quick Ship
  
CDE-600-001
¥3,020.00
货期: 6 周
 
0.01 cell constant 0 to 2 µS/cm and 0 to 19.99 MΩ/cm epoxy low temp cond probe
Quick Ship
  
CDE-600-01
¥1,980.00
货期: 6 周
 
0.1 cell constant 0 to 20 & 0 to 200 µS/cm epoxy low temp cond probe
Quick Ship
  
CDE-600-1
¥1,980.00
货期: 6 周
 
1 cell constant 0 to 2000 µS/cm epoxy low temp cond probe
Quick Ship
  
CDE-600-10
¥1,980.00
货期: 6 周
 
10 cell constant 0 to 20 mS/cm epoxy low temp cond probe
Quick Ship
  
CDE-600-50
¥2,165.00
货期: 6 周
 
50 constant 0 to 200 mS/cm epoxy low temp cond probe
Conductivity cells with 3/4 MNPT 316SS compression fitting, auto. temp. Compensation: 0 to 100°C (32 to 212°F). Wetted materials: Graphite, epoxy, polypropylene, & 316SS Max. Press/Temp: 250psi @ 120°C cable length: 6.10 m (20')
Quick Ship
  
CDE-610-001
¥3,720.00
货期: 6 周
 
0.01 cell constant 0 to 2 µS/cm & 0 to 19.99 MΩ/cm epoxy high temp cond probe
Quick Ship
  
CDE-610-01
¥2,835.00
货期: 6 周
 
0.1 cell constant 0 to 20 and 0 to 200 µS/cm epoxy high temp cond probe
Quick Ship
  
CDE-610-1
¥2,835.00
货期: 2 周
 
1 cell constant 0 to 2000 µS/cm epoxy high temp cond probe
Quick Ship
  
CDE-610-10
¥2,835.00
货期: 6 周
 
10 cell constant 0 to 20 mS/cm epoxy high temp cond probe
Quick Ship
  
CDE-610-50
¥3,020.00
货期: 6 周
 
50 cell constant 0 to 200 mS/cm epoxy high temp cond probe
Required for Use of pH and ORE Sensors
Quick Ship
  
PHE-600-SB
¥1,570.00
货期: 6 周
 
† Salt Bridge kit kit with PVDF outer junction (3 pack) for required for use with PHE/ORE-600 Series sensors
Quick Ship
  
PHE-612-SB
¥1,570.00
货期: 6 周
 
† Salt Bridge kit with PVDF outer junction (3 pack) for PHE/ORE-610/620 Series sensors
pH Accessories
Quick Ship
  
PHE-600-C-(*)
咨询  
货期: 
 
 
$3.00/foot Interconnect cable for PHE/ORE-600 Series
Quick Ship
  
PHE-600-EP
¥1,570.00
货期: 6 周
 
Electrode protector
Quick Ship
  
PHE-600-JB
¥1,075.00
货期: 6 周
 
Junction box with integrated terminal strip.
Quick Ship
  
PHE-610-EP
咨询  
货期: 
 
 
Electrode protector for PHE/ORE-610/620
Quick Ship
  
PHE-620-BVA
咨询  
货期: 
 
 
PVC hot tap ball valve assembly
所有金额以RMB显示
注: Comes complete with operators manual.

* Insert cable length in feet.

†The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.


 

产品手册:

下载 PHUCN600 - Multi-Parameter Controller & Analyzer (NOTE: 40MB)
下载 PHUTX601 - Multi-Parameter Transmitter (NOTE: 21MB)
下载 PHE--600/610, ORE-600/610 - Differential pH and ORP Probes
下载 CDE-600/610 - Conductivity Cells