熔融金属陶瓷护套热电偶

NEP-TX Series

Molten Metal Ceramic Sheath Thermocouple

查看下面所有型号

下单

Up to 1250°C (2282°F) Temperature Rating
For Use in Molten Non-Ferrous Metals
Connection Head with Terminal Block
Custom Probe Lengths Available
Available in Dual Element
High Temperature Thermal Shock Resistance
Corrosion Resistance
1¼ NPT Mounting Thread Standard

热电偶 - 查看相关产品

产品描述

OMEGATITE™ 650 is the ceramic sheath which is an alloy of silicon nitride and aluminum oxide. This superior refractory material has the combined properties of silicon nitride (high strength, hardness, fracture toughness, and low thermal expansion) and aluminum oxide (corrosion resistance, chemically inert, high temperature capabilities, and oxidation resistance). Not recommended for caustic solutions and hydrofluoric acid.

Most refractory products can be used only in high temperature applications where one or two of the following properties are required: thermal shock resistant, mechanical strength, corrosion resistance, abrasion resistance or electrical insulation. OMEGATITE™ 650 combines all these properties in one refractory material. Preheating of the process is not necessary.

OMEGATITE™ 650 is uniquely qualified for non-ferrous molten metal applications and high wear or high impact environments up to 1250°C (2282°F).

OMEGATITE™ 650 is non-wetting for most non-ferrous metals. It is gas tight, chemically inert, resistant to corrosion and metal attack, and features high strength, hardness, and thermal shock resistance.

OMEGATITE™ 650 thermocouple sheaths are used extensively for continuous measurements in nonferrous metals. In molten aluminum, OMEGATITE™ 650 is thermally shock resistant, nonwetting, does not contaminate the melt, provides continuous, reliable temperature measurement, and is resistant to degradation even in aggressive aluminum lithium alloys.

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

NEP-TX-N-PTRS-1628-475

咨询

货期:

Type N Probe, 475mm (18.75in.) length, 28mm (1.10 in.) diameter

† 所有金额以RMB显示
注: Ceramic tube packaged separately to avoid breakage during shipping. Shipped unassembled.

产品编号生成器

在此处生成您自己的产品编号

	(1)		(2)	(3)
NEP-TX-		-PTRS-1628-

选项说明:

(1) Select Calibration 选项:
K for Type K
N for Type N

(2) Select Probe Length (in increments of 150mm) 选项:
475 for 475mm (18.75in.) - Standard Length
CUSTOM for Select a custom length in increments of 150mm (6 in.)

(3) -DUAL 选项:
无（选项为空白） for Standard Configuration
-DUAL for Dual Element

注: 并非所有组合都有效，请查阅规格表上的有效产品编号。