Fail-Safe Dry Material Rotary Paddle Level Switches

LVD-803 and LVD-804 Series

^¥4,053.39 LVD-803

下单

Reliable Magnetic Technology (Patented)
Twist On/Off Cover— No More Bolts!
Wiring Access—2 Conduit Entrances
Motor Shuts Off When Paddle is Impeded Significantly Extends Motor Life and Reduces Maintenance Costs
Local Status Indicating Light on Most Models
Standard Units Rated to 121°C (250°F)
Hi-Temp Models Rated to 399°C (750°F)

液位测量 - 查看相关产品

产品描述

The LVD-800 Series fail-safe bin monitor is the state-of-the-art in rotary paddle technology. Utilizing magnetic sensing technology and a unique housing design, the LVD-800 Series fail-safe bin monitor is the most reliable, technician-friendly, rugged and economical truly fail-safe rotary paddle point level control sensor of its kind.

The LVD-800 Series fail-safe bin monitor provides the ultimate in performance wherever critical continuous operation must be ensured. Detection of both material presence and its own operational status is performed on a continuous basis. The LVD-800 Series fail-safe level sensor monitors its electrical and mechanical operating condition. This, in conjunction with separate outputs provided for material sense and unit status (fault conditions) makes this unit a "truly" fail-safe device.

While the LVD-800 Series fail-safe bin monitor is an evolution in rotary paddle technology, it continues to use tried-and-true operating techniques. Unlike many other available units, the LVD-800 Series incorporates a feature that automatically shuts off its motor when the paddle is in a stalled condition. This extends the life of the unit and minimizes maintenance.

Principle of Operation
The operation of the LVD-800 Series rotary paddle fail-safe bin monitor uses magnetic sensing technology to detect both material presence and operational status of the unit. This method is simple and more reliable than that used by other manufacturers. The unit is installed through the wall of the vessel so that the paddle protrudes inside the vessel. A small electric motor drives the paddle, which rotates freely in the absence of material.

The rotation of the unit’s shaft is continuously monitored by detection of a magnetized rotating disk (patented). When the paddle is impeded by material, the shaft rotation stops. The motor rotates within the housing and magnetized sections of the motor mounting plate are detected (patented). Use of these magnetic sensing techniques eliminates problems that may occur with fouling of the optical systems used by other brands.

The built-in microcontroller performs self-diagnostics and monitors both shaft and motor mounting plate rotation. This allows the unit to easily distinguish between material presence and any electrical and mechanical failure of the unit. When material presence is detected, the SENSE relay changes state and the drive motor is deenergized to extend motor life. This output is available to control a process function or alarm circuit. When the material level drops, a tension spring returns the drive motor to its original running condition and is reactivated.

A unit failure is detected by sensing a lack of shaft rotation while material presence has not been detected by rotation of the motor mounting plate. In a failure condition the independent FAULT relay will change state indicating that an error condition exists. Monitoring the state of both the SENSE and FAULT relays provides the most flexibility for control and fail-safe monitoring.

The rugged and reliable design of the LVD-800 Series fail-safe bin monitor makes it the best choice for critical level control applications. The unit is compatible with many granular, pelletized and powder bulk applications. It can be utilized for high level indication of materials over 160 kg/m³ (10 lb/ft³) and for low and intermediate level indication for materials over 80 kg/m³ (5 lb/ft³). The LVD-800 Series bin level monitor can be installed almost anywhere dry bulk materials are stored including bins, hoppers, silos and tanks.

Please see the Material Characteristics Guide for assistance in determining the compatibility with the LVD-800 series.

SPECIFICATIONS
Power Requirements: 115 Vac (±15%); 9 VA; 50/60 Hz; 230 Vac (±15%); 9 VA; 50/60 Hz
Ambient Operating Temp: -40 to 65°C (-40 to 150°F)
Internal Bin Temp*:
Standard Unit: to 121°C (250°F)
Hi-Temp Unit: to 399°C (750°F)
Conduit Connection: Two (2) ¾ NPT

OUTPUTS
Material Sense: One SPDT; 5A @ 250 Vac, 30 Vdc max
Unit Status (Fault): One SPDT; 5A @ 250 Vac, 30 Vdc max
Maximum Pressure: 30 psi (2 bar)
Sensitivity: 80 kg/m³ (5 lb/ft³) minimum material density (when using large 3-vane paddle)
Indicators: Red and green high intensity LEDs indicate material sense and unit status conditions (Ordinary Location unit only)
Housing: Die cast aluminum, NEMA-4, IP66
Housing Finish: Powder coating
Mounting Connection: 1¼ NPT
Weight: Approx. 3.9 kg (8.5 lb)

MATERIALS OF CONSTRUCTION/ACCESSORIES
Flexible Couplings: 304 stainless steel
Mounting Plates: Carbon steel or 304 stainless steel
All Paddles Except Ex-Flex: 304 SS
Ex-Flex Belt: 304 SS coupling, rubber/fabric blend belt
Flexible Cable Extension: 304SS ¼" diameter

LISTINGS/APPROVALS
Hazardous Locations: Class I, Div. Groups C, D; Class II, Div. 1 & 2, Groups E, F, G, CE Mark

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

其他客户同时购买: 这个图标可以点击扩大，跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述

数量

产品描述

LVD-803

¥4,053.39

货期: 6 周

Dry level switch, 115 Vac, 1 1/4 NPT

LVD-803-24V

咨询

货期:

Dry level switch, 115 Vac, 1 1/4 NPT, 24Vdc Power

LVD-803-EXP

¥4,409.75

货期: 6 周

Dry level switch, Class 1, Div. 1 & 2, Groups C, D; Class II, Div. 1 & 2, Groups E, F, G

LVD-803-EXP-HT

¥7,571.77

货期: 6 周

High Temperature Dry level switch, Class 1, Div. 1 & 2, Groups C, D; Class II, Div. 1 & 2, Groups E, F, G

LVD-803-HT

¥7,332.75

货期: 6 周

High Temperature, Dry level switch, 115 Vac, 1 1/4 NPT

LVD-804

¥4,111.05

货期: 6 周

Dry level switch, 230 Vac, 1 1/4 NPT

LVD-804-HT

¥7,151.98

货期: 6 周

High Temperature, Dry level switch, 230 Vac, 1 1/4 NPT

Paddles (Required)

LVD-800-1V

¥319.20

货期: 6 周

1 Vane insertable* for low level control of avg. weight [>320 kg/m3 (>20 lb/ft3)] material or low to high level control of heavy materials 38 mm (11/2") diameter

LVD-800-3V

¥319.20

货期: 6 周

3 Vane standard for average weight [>320 kg/m3 (>20 lb/ft3)] materials

LVD-800-3VL

¥319.20

货期: 2 周

3 Vane large for light weight material [>480 kg/m3 (<30 lb/ft3)]

LVD-800-1VS

¥319.20

货期: 6 周

1 Vane insertable* scimitar for light to average weight [>320 kg/m3 (>20 lb/ft3)] material

LVD-800-2V

¥319.20

货期: 2 周

2 Vane for heavy materials [>1200 kg/m3 (>75 lb/ft3)] under 11/2" in diameter

LVD-800-4V

¥319.20

货期: 6 周

4 Vane for use with average to heavy weight materials [>1200 kg/m3 (>75 lb/ft3)]

LVD-800-1VT

¥623.72

货期: 6 周

1 Vane triangular for light to average weight [>480 kg/m3 (<30 lb/ft3)] material

LVD-800-EFC

¥623.72

货期: 6 周

Ex-flex three-ply 508 mm (20") belt vane for heavy materials over 51 mm (2") in diameter (top mount only)

Accessories

LVD-800-FC

¥443.95

货期: 6 周

Flexible coupling spring flex for absorbing heavy loads, side loads and protect internal workings which extends the life of the paddle

LVD-800-FCE

¥1,850.28

货期: 6 周

Flexible cable extension, 304SS, 1.98 m (78") (can be cut in field) eliminates the need for a mounting plate, extension guard and flexible coupling ($1.90 per additional inch)

LVD-800-MPA

¥507.54

货期: 6 周

Mounting plate with 11/4 NPT heavy duty aluminum for flat surfaces or thin walled vessels where extra strength is required

LVD-800-MPFCS

¥319.20

货期: 6 周

Mounting plate with 11/4 NPT full coupling, carbon steel, for top mount installations where a shaft extension and shaft guards are required

LVD-800-MPHCS

¥319.20

货期: 6 周

Mounting plate with 11/4 NPT half coupling, carbon steel, for side mount installations

LVD-800-MPFSS

¥813.28

货期: 2 周

Mounting plate with 11/4 NPT full coupling, stainless steel, for top mount installations where a shaft extension and shaft guards are required

LVD-800-MPHSS

¥813.28

货期: 6 周

Mounting plate with 11/4 NPT half coupling, stainless steel, for side mount installations

Galvanized Pipe Shaft Guard* 11/4" pipe, SCH40

LVD-800-SGGI-6

¥308.19

货期: 6 周

6" Shaft guard* 11/4" pipe, SCH40, galvanized pipe

LVD-800-SGGI-12

¥385.24

货期: 6 周

12" Shaft guard* 11/4" pipe, SCH40, galvanized pipe

LVD-800-SGGI-18

¥507.54

货期: 6 周

18" Shaft guard* 11/4" pipe, SCH40, galvanized pipe

LVD-800-SGGI-24

¥648.18

货期: 6 周

24" Shaft guard* 11/4" pipe, SCH40, galvanized pipe

LVD-800-SGGI-36

¥837.74

货期: 6 周

36" Shaft guard* 11/4" pipe, SCH40, galvanized pipe

LVD-800-SGGI-48

¥1,011.32

货期: 6 周

48" Shaft guard* 11/4" pipe, SCH40, galvanized pipe

LVD-800-SGGI-60

¥1,251.04

货期: 6 周

60" Shaft guard* 11/4" pipe, SCH40, galvanized pipe

LVD-800-SGGI-72

¥1,430.25

货期: 6 周

72" Shaft guard* 11/4" pipe, SCH40, galvanized pipe

Stainless Steel Shaft Guard* 11/4" pipe, SCH40

LVD-800-SGSS-6

¥443.95

货期: 6 周

6" Shaft guard* 11/4" pipe, SCH40, stainless steel

LVD-800-SGSS-12

¥623.72

货期: 6 周

12" Shaft guard* 11/4" pipe, SCH40, stainless steel

LVD-800-SGSS-18

¥813.28

货期: 6 周

18" Shaft guard* 11/4" pipe, SCH40, stainless steel

LVD-800-SGSS-24

¥955.18

货期: 6 周

24" Shaft guard* 11/4" pipe, SCH40, stainless steel

LVD-800-SGSS-36

¥1,369.31

货期: 6 周

36" Shaft guard* 11/4" pipe, SCH40, stainless steel

LVD-800-SGSS-60

¥2,028.78

货期: 6 周

60" Shaft guard* 11/4" pipe, SCH40, stainless steel

LVD-800-SGSS-72

¥2,387.56

货期: 6 周

72" Shaft guard* 11/4" pipe, SCH40, stainless steel

Galvanized Pipe Solid shaft extension** 1/4" pipe, SCH40

LVD-800-SEGI-3

¥319.20

货期: 2 周

3" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-6

¥385.24

货期: 6 周

6" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-9

¥385.24

货期: 2 周

9" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-12

¥443.95

货期: 2 周

12" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-18

¥507.54

货期: 6 周

18" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-24

¥568.69

货期: 6 周

24" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-30

¥623.72

货期: 6 周

30" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-36

¥703.21

货期: 6 周

36" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-48

¥813.28

货期: 6 周

48" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-60

¥935.58

货期: 6 周

60" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

LVD-800-SEGI-72

¥1,013.00

货期: 6 周

72" Solid shaft extension**, 1/4" pipe, SCH40, galvanized pipe

Stainless Steel Solid shaft extension**, 1/4" pipe, SCH40

LVD-800-SESS-3

¥385.24

货期: 6 周

3" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-6

¥443.95

货期: 6 周

6" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-9

¥443.95

货期: 6 周

9" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-12

¥507.54

货期: 6 周

12" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-18

¥568.69

货期: 6 周

18" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-24

¥623.72

货期: 2 周

24" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-36

¥813.28

货期: 6 周

36" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-48

¥935.58

货期: 2 周

48" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-60

¥1,075.80

货期: 6 周

60" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

LVD-800-SESS-72

¥1,191.75

货期: 6 周

72" Solid shaft extension**, 1/4" pipe, SCH40, stainless steel

Replacement Parts

LVD-800-SR

¥70.94

货期: 6 周

Spiral roll pin, 3.18 x 4.76 mm (1/8 x 3/16") SS (connects paddle to solid shaft coupling)

LVD-800-GDP

¥70.94

货期: 6 周

Grooved dowel pin, 3.18 x 15.88 mm (1/8 x 5/8") SS (connects solid shaft coupling to shaft)

LVD-800-DM115

¥758.25

货期: 6 周

Drive Motor Assembly for LVD803 (115 Vac, 50/60 Hz)

LVD-800-DM230

¥758.25

货期: 6 周

Drive Motor Assembly for LVD803 (230 Vac, 50/60 Hz)

LVD-800-DM24

咨询

货期:

Drive Motor Assembly for LVD803 (24 Vac/dc, 50/60 Hz)

LVD-800-MS

¥94.17

货期: 2 周

Micro seal

LVD-800-MMP

¥193.24

货期: 2 周

Motor mounting plate assembly

LVD-800-B

¥133.31

货期: 6 周

Bearings (2 required per unit)

LVD-800-DS

¥193.24

货期: 6 周

Stainless steel drive shaft with slip clutch and gear assembly

LVD-800-RR

¥70.94

货期: 6 周

Retaining ring (for retaining the motor mounting plate to drive shaft)

LVD-800-RS

¥379.12

货期: 6 周

Return spring assembly

† 所有金额以RMB显示
注: Comes complete with operator’s manual.

* Order paddles separately.

For optional 24VDC, add suffix "-24V" to model number, (available on the LVD-803 only), add $30 to price.

For optional high temperature version up to 750°F for SS (top or vertical mount only), add suffix "-HT" to model number, add $300 to price.

* Insertable paddles eliminate the need for mounting plate. LVD-800-1VS is insertable through either a half or full 11/4" coupling, that is welded to the bin wall. LVD-800-1V is insertable through a half 11/4" coupling.

* Shaft guards are required for use with solid shaft extensions to limit the movement caused by side loading that would otherwise damage the working components of the paddle unit. Shaft guards should be the same length as the extension and should always be used when the extension meets or exceeds 460 mm (18") in length.

** Extension and guard lengths [not to exceed 3.6 m (144") in length]

订购示例: (1) LVD-800-3V 3 Vane standard for average weight [>320 kg/m3 (>20 lb/ft3)] materials, ¥319.20 plus (1) LVD-803 Dry level switch, 115 Vac, 11/4, ¥4,053.39, ¥319.20 + 4,053.39 = ¥4,372.59

产品手册:

下载 LVD-800 Series - Dry Material Rotary Paddle Level Switches

下载 LVD-800-FCE - FLEXIBLE CABLE EXTENSION