购物车  |  联系  |  info@cn.omega.com  | 
omega-qr-code OMEGA微信公众号
咨询热线 400-619-0559

环形电导率或浓度分析仪

CDCN442

Toroidal Conductivity or Concentration Analyzer | CDCN442

Toroidal Conductivity or Concentration Analyzer

¥8,115.00 CDCN442

2年保修 CE
  • NEMA 4X (IP68) Case
  • 2 x 16 Digit LCD Readout
  • Assembly in 51 mm (2") Tube or Flat Surface or Panel 144 x 144 x 100 mm DIN (5.7 x 5.7 x 4")
  • Simple 3 Key Operation
  • Offers Cell Check
  • RS485 Output, ModBus and Proprietary Communication Protocol
电导率仪表 - 查看相关产品

产品描述

The CDCN442 toroidal conductivity system isdesigned for online monitoring of chemically aggressive process solutions, water applications that coat or foul traditional sensors, and plating bath operations in which high current densities are present. The sensor consists of 2 metallic ribbon coils that are fixed in place by the sensor jacket material. The drive coil is used to induce a current in the process solution. The second sensing coil is used to measure the current in the process solution; the magnitude of this current is proportional to the conductivity of the process solution. Toroidal sensors are available in polypropylene, and PEEK™ to ensure that sensor-wetted materials are chemically resistant to process chemicals. The sensor material is nonconductive, thereby isolating the sensor from electrical noise and ground loops that can influence the integrity of the measurement. This material also makes the sensor resistant to electrode coating, since most substances do not adhere to the sensor material. Sensors can be submersion mounted for easy installation in open tanks or pipe mounted in the optional 51 mm (2") tee fitting, which is keyed to the sensor for proper alignment. Tee fitting material is polypropylene. For larger pipe diameters, the sensor can be insertion mounted through a 11.2 NPT ball valve for easy retraction. The monitor comes with concentration/temperature tables for sodium hydroxide, potassium hydroxide, hydrochloric acid, nitric acid, and sulfuric acid. A configurable table allows the user to enter data points for a custom concentration curve. Typical applications include waste water treatment, power plants, thermo electric plants, pharmaceutical, photographic industries, soft drinks industries.

Element Range Element Range
HNO3 0 to 280 g/L H2SO4 940 to 998 g/L
HF 0 to 300 g/L H2CrO4 0 to 100 g/L
NaOH 0 to 150 g/L NaCl 0 to 260 g/L
NaOH 150 to 500 g/L K2CO3 0 to 315g/L
H2SO4 0 to 300 g/L Na2SO4 0 to 220 g/L
H2SO4 350 to 800 g/L HCl 200 to 350 g/L

SPECIFICATIONS
General
Construction Materials:
   Case: Aluminum (SAE323)
   Faceplate: ABS
   Anti-Corrosion Treatment: Finished with electrostatic epoxy paint
Power Consumption: 3.5 VA
Operation: 90-240 Vac 50/60Hz
Weight: 1.3 kg (2.8 lb)
Analyzer
Conductivity Range: 1 µS/cm to 1 S/cm
Resistivity Range: 10 MΩ/cm to infinity
Resolution: 0.1 or 0.01
Temperature Compensation: 0 to 100°C (32 to 212°F), Automatic or Manual
Operating Temperature: 5 to 40°C (41 to 104°F)
Cell Constants Offered: 0.01, 0.1, 1, 5 or 10 cm-1
Transmitter
Analog Output: 4 to 20 mA (2), recorder output
Impedance: 600 Ω
Optical Galvanic Isolation: 2000 Vac
Controller
On/Off Alarm Outputs (2): NO (1A / 240 Vac)
Control Output (4 to 20mA): can be programmed as P + I + D Control
CDE-442
   Range: 1 mS to 1 S
   Body Material: PVDF
   Temperature: 0 to 130°C (32 to 266°F)
   Insertion length: 100 mm (3.93")
   Process Connection: ¾ NPT
订购 所有价格均为人民币税前价格,不包括13%增值税和运费!(指定型号)
网上下单立享5%折扣!

其他客户同时购买: 这个图标可以点击扩大,跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述
数量
产品描述
Quick Ship
  
CDCN442
咨询  
货期: 
 
 
Conductivity and concentration analyzer
Quick Ship
  
CDE-442
咨询  
货期: 
 
 
Toroidal conductivity cell (1 required)
Quick Ship
Click to expand/minimize a list of what others bought with theCDSA-10
CDSA-10
¥515.00
货期: 2 周
 
10 micro Siemen conductivity solution
所有金额以RMB显示
注: Comes complete with hardware for 51 mm (2") tube installation, wall mount brackets, and operator's manual (sensor sold separately).