4-1/2数字热电偶仪表，1/8 DIN

DP3002-J, -K, -T

4-1/2 Digit Thermocouple Meters, 1/8 DIN

^¥3,981.33 DP3002-KC1

下单

J, K or T Thermocouple Input
0.05 deg/deg Cold-Junction Error
-138 to 1248°C Range
Five-Segment Linearization
0.1°C or 0.1 °F Resolution, Jumper-Selectable
1 mV/deg Linearized Recorder Output
120 dB CMR, 70 dB NMR
Bright, 14 mm (0.56") LED Display
Display Hold and Test
115/230 Vac Power
EMI/RFI Filter for AC Power
Screw-Terminal Barrier Strip
Short 104 mm (4.1") Deep ¹/8 DIN Case Options
Isolated 9 to 32 Vdc Power
Isolated 26 to 56 Vdc Power
NEMA 4 (IP65) Splash-Proof Lens Cover

产品描述

From Sep 1st 2018, DP3002 Series will be discontinued. As a possible substitute, please check out the DPPt Meter for details.

The DP3002-J, -K and -T are low-cost 4-1/2 digit (±19,999 count) thermocouple meters with 0.1°C or 0.1°F resolution for indication-only applications. High accuracy is provided by five-segment linearization and matched, graded components for each T/C type.

STANDARD FEATURES
Mechanical features include a bright 14 mm (0.56") display, a screw-terminal barrier strip for signal and power, and a compact 1/8 DIN case that requires less than 104 mm (4.1") behind the panel. Electrical features include cold-junction compensation, jumper selection of °C or °F, and a linearized recorder output of 1 mV per degree.

OPTIONS
Power options include isolated 9 to 32 Vdc and 26 to 56 Vdc. A splash-proof lens cover which meets NEMA 4 (IP65) requirements allows the DP3002 to be used in harsh industrial environments.

SPECIFICATIONS
Input
Thermocouple: Type J (Iron-Constantan, Fe-CuNi) Type K (Chromel-Alumel, NiCr-NiAl) Type T (Copper-Constantan, Cu-CuNi)
Calibration: IEC 584-1 (IPTS-68)
Configuration: Single-ended (-TC lead tied to ANA GND)
Polarity: Bipolar
Zero: Adjustable ±20°C (±36°F)
Cold-Junction Tempco: ±0.05 deg/deg Sensor-Wire Resistance Effect Per
Conductor:
Type J: 40 µdeg/deg/Ω, up to 2500 Ω
Type K: 50 µdeg/deg/Ω, up to 2000 Ω
Type T: 50 µdeg/deg/Ω, up to 2000 Ω
Sensor-Break Current: 300 nA
Sensor-Break Indication: Positive overrange (upscale)
Digital Inputs
Level: TTL or 5V CMOS compatible
Noise Rejection
NMR, SIG HI to SIG LO: 70 dB, 50/60 Hz
CMR, ANA GND to PWR GND: 120 dB, DC to 60 Hz
CMV, ANA GND to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing
Accuracy at 25°C
Range for Rated Accuracy:
Type J: -138.0 to 760.0°C (-216.0 to 1400.0°F)
Type K: -105.0 to 1248.0°C (-157.0 to 1999.9°F)
Type T: -112.0 to 400.0 °C (-170.0 to 752.0°F)
Maximum Error: ±1.5°C (±2.7°F) ±5 cts
Span Tempco: ±0.01% of reading/°C
Resolution: 0.1°C or 0.1°F (jumper-selectable)
Full-Scale Step Response: 1 s
Warmup to Rated Accuracy: 20 min
Analog Output
Voltage: 1 mV/deg
Calibration Error: ±1.5 mV on °C, ±2.7 mV on °F
Current: 1 mA max
Source Resistance: 68 Ω
Analog-to-Digital Conversion
Technique: Dual-slope, average value
Signal-integration period: 100 ms
Read Rate: 2.5/s
Display
Type: 7-segment, red LED
Height: 14.2 mm (0.56")
Symbols: -1.8.8.8.8
Decimal Points: Four positions programmable by jumpers behind the lens or at connector
Overrange Indication: Four leastsignificant digits flash
Power
AC Voltages: 115 or 230 Vac, ±15%
AC Frequency: 49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp
Power Consumption: 3.7 W nominal
Output Voltages: 4.7 Vdc and -4.7 Vdc ±5%, 10 mA max
Environmental
Operating Temperature: 0 to 60°C
Storage Temperature: -40 to 85°C
Relative Humidity: 95% at 40°C (non-condensing)
Mechanical
Bezel: 96 W x 48 H x 5.1 mm D (3.78 x 1.89 x 0.20")
Depth Behind Bezel: 104 mm (4.09")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 15 oz (425 g)
Case Material: 94V-0 UL-rated polycarbonate

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

DP3002-JC1

咨询

货期:

4-1/2 digit thermocouple meters, Type J Iron-Constantan, -138 to 760°C

DP3002-JF1

咨询

货期:

4-1/2 digit thermocouple meters, Type J Iron-Constantan, -216 to 1400°F

DP3002-KC1

咨询

货期:

4-1/2 digit thermocouple meters, Type K Chromel-Alumel, -105 to 1248°C

DP3002-KF1

咨询

货期:

4-1/2 digit thermocouple meters, Type K Chromel-Alumel, -157 to 1999°F

DP3002-TC1

咨询

货期:

4-1/2 digit thermocouple meters, Type T Cu-Constantan, -112 to 400°C

DP3002-TF1

咨询

货期:

4-1/2 digit thermocouple meters, Type T Cu-Constantan, -170 to 752°F

† 所有金额以RMB显示
订购示例: (1) DP3002-KC1 4-1/2 digit Type K thermocouple meter, 115 Vac power, -105 to 1248°C input range., ¥3,981.33

产品编号生成器

在此处生成您自己的产品编号

(1)	(2)	(3)	(4)

选项说明:

(1) Model 选项:
DP3002 for 4-1/2 digit thermocouple meters

(2) Input Range 选项:
-JC1 for -138 to 760°C
-JF1 for -216 to 1400°F
-KC1 for -105 to 1248°C
-KF1 for -157 to 1999°F
-TC1 for -112 to 400°C
-TF1 for -170 to 752°F

(3) Power options 选项:
无（选项为空白） for 115 Vac 50/60 Hz power
-C1 for 230 Vac 50/60 Hz
-C3C for Isolated 9 to 32 Vdc
-C3E for Isolated 26 to 56 Vdc

(4) Add-On Option 选项:
无（选项为空白） for red LED display
-G for Green LED display

注: 并非所有组合都有效，请查阅规格表上的有效产品编号。